EN
The End Suction Centrifugal Pump features a horizontal shaft, an axial suction inlet and a radial discharge outlet. The pump mainly consists of a pump body, impeller, shaft and sealing device. During operation, the rotating impeller generates centrifugal force to draw liquid into the pump and discharge it through the outlet.
The series is used for water supply, heating systems, industrial pressure boosting, liquid transfer, air conditioning, district cooling, irrigation and firefighting applications.
Robust DC solar submersible pump range designed for drainage, high-flow water transfer and agricultural irrigation. Multiple pump structures, outlet sizes and capacity options support applications from compact dewatering to larger farm systems, providing buyers with flexible off-grid solutions for varied operating conditions.
Solar drainage, water transfer and irrigation.
Use with a compatible controller and the stated input-voltage range.
Brushless DC solar submersible pump system.
Self-priming solar jet pump engineered to provide reliable suction, pressure boosting and water transfer without dependable grid electricity. Its strong priming capability and multiple flow options make it suitable for household supply, farm irrigation and remote projects drawing water from tanks, ponds or shallow wells.
Solar water transfer and irrigation where self-priming is required.
Surface installation; maximum suction is 8 m.
Brushless DC solar self-priming pump system.
Compact brushless DC solar surface pump designed for efficient water transfer, garden irrigation and general off-grid pumping. Multiple low-voltage and higher-capacity configurations allow flexible system selection, while the practical self-contained design supports straightforward installation for homes, farms and small commercial projects.
Solar water transfer, irrigation and off-grid surface pumping.
Install as a surface pump; maximum suction is 8 m for the listed models.
Brushless DC solar surface-pump system.
High-flow DC solar surface pump featuring an 8-meter maximum suction capability for efficient water transfer from tanks, ponds and shallow sources. Its broad capacity range makes it a practical choice for field irrigation, farm distribution and general agricultural use in remote or off-grid locations.
Solar-powered surface water transfer and irrigation.
Surface installation; maximum suction 8 m.
DC solar pump system with compatible controller.
Premium stainless-steel impeller solar pump combining corrosion resistance, high hydraulic efficiency and extensive model coverage. Available in multiple diameters, flow rates, heads and input voltages, the series supports agricultural irrigation, deep-well supply and commercial projects that require durable, scalable off-grid pumping solutions.
Solar-powered well water supply, agriculture and irrigation.
Use with a compatible controller and the stated input-voltage range.
DC and AC/DC configurations are shown in the brochure.
Compact low-voltage solar screw pump designed for economical borehole water supply and small-scale irrigation. Its practical 24V and 48V configurations are easy to match with compact solar systems, making the series suitable for farms, gardens, livestock watering and remote household applications.
Compact solar-powered borehole water supply and irrigation.
Use with a compatible solar pump controller and the stated input-voltage range.
Low-voltage brushless DC solar pump system.
Efficient solar screw pump engineered for stable off-grid water lifting with practical flow and high-head performance. Designed for solar-powered borehole systems, it provides a reliable solution for agricultural irrigation, livestock watering, household supply and remote installations where simple operation and energy efficiency are important.
Solar-powered borehole water supply and irrigation.
Use with a compatible solar pump controller and the stated input-voltage range.
Brushless DC solar pump system.
Cost-effective DC plastic solar pump developed for reliable borehole water supply across a wide range of solar input voltages. Its extensive model selection supports different well depths and water demands, making it suitable for agricultural irrigation, livestock projects, household use and remote community water systems.
Solar-powered water supply for wells and irrigation.
Use with a compatible solar pump controller and the stated input-voltage range.
DC solar pump system; controller selection must match the input range.
Versatile DC solar submersible pump featuring plastic impellers and a broad selection of flow, head, voltage and power combinations. It offers an economical solution for farms, livestock watering, borehole supply and irrigation systems, helping distributors serve a wide range of off-grid water applications.
Solar-powered well water supply, farms, livestock and off-grid irrigation.
Use with a compatible solar pump controller and the stated input-voltage range.
DC solar pump configurations and controllers are shown on the original pages.
Energy-efficient DC screw solar pump designed for dependable low-flow and high-head water delivery in areas without reliable grid power. It is well suited to remote wells, livestock watering, household supply and small irrigation projects, with multiple voltage and power options for flexible solar system matching.
Solar-powered water supply for wells, farms, livestock and off-grid irrigation.
Use with a compatible solar pump controller and the stated input-voltage range.
Brushless DC solar pump system; controller configurations are shown on the original page.
Heavy-duty stainless-steel screw-type deep well pump built to deliver dependable high-head performance from compact borehole installations. The series provides stable water output for remote properties, agricultural use and domestic supply, with practical single-phase configurations that simplify installation and everyday operation.
Applications
Deep-well water lifting and water supply.
Operating Conditions
Maximum fluid temperature: +40°C; maximum sand content: 2%; minimum well diameter: 4 in; speed approximately 2850 r/min.
Motor / System Information
Single-phase 220V configurations are shown on the original page.
Durable 4-inch stainless-steel multistage pump designed for consistent high-head operation and efficient water transfer from deep wells. Its wide hydraulic coverage, robust construction and multiple stage configurations make it suitable for irrigation networks, municipal supply, commercial buildings and industrial water systems.
For water supply from wells or reservoirs; for domestic, civil and industrial applications; for garden use and irrigation.
Maximum fluid temperature: +40°C; maximum sand content: 2%; maximum immersion: 120 m; minimum well diameter: 4 in.
Rewindable motor; single phase 150–240V/50Hz; three phase 380–415V/50Hz; NEMA dimension standards; insulation class B; protection grade IP68.
Slim stainless-steel borehole pump engineered to provide efficient and stable water lifting across residential, agricultural and light industrial applications. Multiple capacity and stage options allow buyers to match different well depths, flow requirements and pressure demands while maintaining dependable long-term operation.
For water supply from wells or reservoirs; for domestic, civil and industrial applications; for garden use and irrigation.
Maximum fluid temperature: +40°C; maximum sand content: 2%; maximum immersion: 80 m. Minimum well diameter: 3 in or 3.5 in.
Rewindable motor; single phase 150–240V/50Hz; three phase 380–415V/50Hz; NEMA dimension standards; insulation class B; protection grade IP68.
High-performance 4-inch stainless-steel submersible pump covering a broad range of capacities, motor powers and delivery heads. Designed for demanding borehole installations, it provides reliable water supply for agriculture, irrigation, buildings and industrial systems while offering flexible model selection for different project requirements.
For water supply from wells or reservoirs; for domestic, civil and industrial applications; for garden use and irrigation.
Maximum fluid temperature: +40°C; maximum sand content: 2%; maximum immersion: 80 m. Minimum well diameter: 4 in.
Rewindable motor; single phase 150–240V/50Hz; three phase 380–415V/50Hz; NEMA dimension standards; insulation class B; protection grade IP68.
Compact stainless-steel deep well pump developed for narrow-bore installations where space, reliability and efficient water delivery are essential. Its corrosion-resistant construction and practical hydraulic range make it a dependable choice for household water supply, garden irrigation, small farms and light commercial pumping systems.
The BK Stainless Steel Centrifugal Pump range is designed for clean-water supply, tank transfer, irrigation, circulation, and light commercial water duties. Stainless steel pump components, a ceramic/graphite mechanical seal, and an aluminum alloy motor housing support compact surface installations. Five models from 0.37 kW to 1.5 kW provide maximum flows from 4.8 to 30 m³/h and heads from 9.2 to 18 m, with a 7 m maximum suction lift. BK50 uses 1-inch connections, while BK75 through BK200 use 1.5-inch connections. IP44 protection, Class B insulation, external ventilation, and a built-in thermal protector support continuous clean-water operation within the stated limits.
The CM100 Domestic Centrifugal Water Pump is a compact clean-water solution for household supply, garden irrigation, tank transfer, and small pressure-feed systems. Its cast iron pump body and support, aluminum alloy motor housing, and brass or 304SS impeller options provide a practical configuration for surface-mounted installations. The available CM/CPM models range from 0.37 kW to 2.2 kW, delivering maximum flows from 5.1 to 8.4 m³/h and maximum heads from 22 to 55 m. With a maximum suction lift of 9 m, IP44 protection, Class B insulation, external ventilation, and thermal protection, the range supports clean-water applications within the stated operating conditions.
The JETDP Self-Priming Deep Well Jet Pump is an ejector-based surface pump for clean-water supply from deeper well sources, domestic distribution, garden irrigation, and tank filling. The series includes JETDP225, JETDP370, DP505A, and DP750A models from 0.55 kW to 1.5 kW. With E25 and E30 ejector options, the range provides maximum head values from 30 to 70 m and maximum flow values from 1.8 to 3.0 m³/h. Cast iron hydraulic parts, brass impellers, PPO venturi components, IP44 protection, external ventilation, and a built-in thermal protector support stable operation in the stated conditions.
The STM Automatic Peripheral Water Pump is a compact surface-mounted solution for household water supply, low-pressure boosting, garden irrigation, tank filling, and clean-water transfer. The series includes STM250(A), STM300(A), STM370(A), STM550(A), and STM750(A) models, ranging from 0.25 kW to 0.75 kW. They provide maximum flows from 1.8 to 3.0 m³/h and maximum heads from 25 to 50 m, with a maximum suction lift of 9 m. A cast iron hydraulic section, brass impeller, aluminum alloy motor housing, IP44 protection, Class B insulation, external ventilation, and built-in thermal protection support use within the stated operating conditions.
The CTP/BR Stainless Steel Centrifugal Pump range is designed for clean-water supply, circulation, irrigation, and light commercial transfer applications. It features stainless steel pump components, an aluminum alloy motor housing, a 304 stainless steel shaft, and a ceramic/graphite mechanical seal. CTP models use PPO impellers, while BR versions use 304SS impellers. The listed CTP range covers 0.37 to 1.1 kW, delivering maximum flows from 5.0 to 8.7 m³/h and heads from 18 to 34 m. With a 9 m maximum suction lift, IP44 protection, Class B insulation, external ventilation, and thermal protection, it supports clean-water use within the stated limits.
The CPM Centrifugal Pump range is a compact clean-water solution for domestic supply, garden irrigation, water transfer, pressure feed, and light commercial applications. Its cast iron pump body and support, aluminum alloy motor housing, and brass or 304SS impeller options support surface-mounted installations. Available models range from 0.37 kW to 2.2 kW, providing maximum flows from 5.1 to 8.4 m³/h and maximum heads from 22 to 55 m. With a maximum suction lift of 9 m, IP44 protection, Class B insulation, external ventilation, and built-in thermal protection, the CPM series supports clean-water operation within the stated conditions.
The DP Self-Priming Deep Well Jet Pump is an ejector-based surface pump for clean-water supply from deeper well sources, domestic distribution, garden irrigation, and tank filling. Available models include JETDP225, JETDP370, DP505A, and DP750A, with power from 0.55 to 1.5 kW. Using E25 or E30 ejector options, the range provides maximum heads from 30 to 70 m and maximum flows from 1.8 to 3.0 m³/h. Cast iron hydraulic parts, brass impellers, PPO venturi components, IP44 protection, Class B insulation, external ventilation, and built-in thermal protection support clean-water operation within the stated conditions.
The GS100 Automatic Self-Priming Pump range is designed for clean-water supply, automatic boosting, water-tower feeding, shallow-source lifting, garden irrigation, and small transfer systems. It includes the compact GS100 and STM models from 0.1 to 0.75 kW, delivering maximum flows from 1.5 to 3.0 m³/h and maximum heads from 21 to 50 m. The pumps use cast iron hydraulic parts, brass impellers, aluminum alloy motor housings, and optional automatic pressure-switch control. With up to 9 m suction lift, IP44 protection, Class B insulation, external ventilation, and thermal protection, the range supports clean-water service within the stated operating limits.
EN
